Produtos Mais recentes

  • Aquecedor Elétrico PTC 20kw
  • Aquecedor de refrigerante de alta tensão de 2,5kw
  • Aquecedor de refrigerante de alta tensão 7kw
  • Aquecedor de refrigerante PTC 10kw
  • Aquecedor de água 30kw diesel para o ônibus
  • Aquecedor de Estacionamento Ar 2kw

Contate-nos

    Hebei Nanfeng Automóvel Equipamento (Grupo) Co.,Ltd

    Telefone: mais 86 18811334770

    Telefone: mais 86 0317 8620396

    Telefone: mais 86 010 58673556

    Fax: mais 86 010 58673226

    E-mail: nh.jiao@auto-parkingheater.com

    Adicionar: Sala 505, Edifício B, Grátis Cidade Centro, Não. 58, Leste Terceiro Anel Sul Estrada, Chaoyang Distrito, Pequim,100022,PRChina

Válvula Três Vias de Controle de Temperatura para BTMS video

Válvula Três Vias de Controle de Temperatura para BTMS

Esta avançada Válvula de Desvio/Mistura Três-Vias é projetada para gerenciamento térmico preciso em Sistemas de Controle Térmico de Baterias (BTMS). Ela garante a temperatura ideal da bateria controlando com precisão o fluxo de refrigerante entre os circuitos de aquecimento e resfriamento. Apresentando um design compacto, à prova de vazamentos-, baixo volume interno e compatibilidade com refrigerantes comuns, ela aumenta a eficiência e a confiabilidade do sistema. Ideal para veículos elétricos e sistemas de armazenamento de energia, esta robusta válvula suporta maior vida útil da bateria, segurança e desempenho. É um componente crítico para alcançar um controle térmico superior em aplicações eletrificadas modernas.

Descrição

Se você está procurando a válvula de 3 vias para controle de temperatura para BTMS, seja bem-vindo a comprar o produto por atacado de nossa fábrica. Como um dos principais fabricantes e fornecedores na China, ofereceremos a você o melhor serviço e entrega rápida. Agora, verifique a cotação com nosso vendedor.

 

Temperature Control 3-Way Valve for BTMS

 

 

3 way valve 1

 

3 way valve 4

<=20mL/min (water test), 30kPa pressure difference
<=5mL/min (gas test), 340kPa (gauge pressure)
<10s
24V
20V~30V
300,000 switch cycles

 

The valve is driven by a motor or electromagnetic coil. By changing the position of the valve core, it precisely controls the flow direction and flow distribution of fluid (coolant or refrigerant). It is the core actuator of the vehicle thermal management system to achieve multi-functional and high-efficiency operation.

 

 

 

 

3 way valve 6

 

 

Flow diversion or merging. It has one inlet and two outlets (A, B ports) or two inlets and one outlet.

 

Typically driven by a stepper motor, it can precisely and continuously adjust the valve core angle, thereby steplessly regulating the flow ratio to port A and port B (e.g., from 100:0 to 0:100).

 

Typically driven by an electromagnetic coil, the valve core has only two or three fixed positions (e.g., all A, all B, or half A/half B), used for path switching.

 

 

installation

inatallation2

★It is recommended to install rubber shock-absorbing pads at the bottom of the two M6 connection mounting holes, with a hardness of HA70~80.

 

3 way valve 2

The electric three-way valve is primarily used in the coolant circuit for precise heat distribution.

 

Battery and cabin heat distribution: In winter, it dynamically distributes heat generated by the PTC or heat pump to the battery pack (for heating) and the cabin heater core (for warmth) as needed.

Heat source selection: In hybrid/range-extended vehicles, it selects whether the heat comes from engine waste heat, the PTC heater, or the heat pump.

Cooling path selection: It directs heat from the battery or electric drive system that needs cooling to the low-temperature radiator or the chiller coupled to the air conditioning system.

Simple analogy: Like an adjustable faucet diverter, it determines whether hot water flows to the bathroom or the kitchen, and how much to distribute to each.

 

3 way valve 3

High integration: Integrated with electronic water pumps, sensors, etc., forming a "thermal management execution module."

 

Lower power consumption and faster response: Optimized drive motor and control system.

 

Intelligent predictive control: Based on navigation and cloud data, it adjusts valve status in advance, achieving a seamless experience of "comfort upon entry, battery ready."

 

1

2

3

 

 

 

BTMS07

 

 

 

 

BTMS10

 

 

 

Tag: válvula de controle de temperatura 3 vias para BTMS, China, fábrica, fornecedores, fabricantes, vendedor, atacado, cotação

Enviar inquérito

(0/10)

clearall